- Products
- TIM Products
- By Thermal Conductivity
- Thermal Conductivity <1.0
- Thermal Conductivity 1.1 - 2.0
- 1. Li2000, 1.20 W/mk
- 2. L37-3F, 1.40 W/mk
- 3. L37-3L, 1.50 W/mk
- 4. L37-5, 1.60 W/mk
- 5. L37-3, 1.70 W/mk
- 6. Li-98P, 1.70 W/mk
- 7. Li-98C, 1.80 W/mk
- 8. L37-5S, 1.80 W/mk
- 9. H48-6S, 1.80 W/mk
- 10. Ti900, 1.80 W/mk
- 11. CP series, 1.90 W/mk
- 12. L37-3S, 1.95 W/mk
- 13. S730, 2.00 W/mk
- 14. Li98CN, 2.00 W/mk
- 15. Li2000A, 2.00 W/mk
- 16. PC93, 2.00 W/mk
- 17. TG2030, 2.00 W/mk
- Thermal Conductivity 2.1 - 4.0
- Thermal Conductivity > 4.1
- By Hardness
- By Insulation Strength
- Silicone Thermal Conductive Pad
- Non-Silicone Thermal Conductive Pad
- Thermal Adhesive Tape
- Thermal Conductive Gel
- Thermally Conductive Insulator
- Phase Change Material Series
- Other Thermal Products
FAQ 
Home > Products > Thermally Conductive Interface Tapes > Li-2000 Thermal Tape
pre-cut for different shape.
Li-2000 Thermal Tape
Feature
- Good adhesion (Silicone PSA)
- Low contact thermal impedance
- High bond strength
- High temp. – Long term stability
- Electrical insulating
Application
- Electronic components: IC、CPU、MOS
- LED、M/B、P/S、Heat Sink、LCD-TV、Notebook PC、PC、Telecom Device、Wireless Hub……etc.
- DDR II Module、DVD Applications、Hand-set applications……etc.
(mouse over)
 |
| Property | Li-2000 | Unit | Tolerance | Test Method | |
| Thermal Conductivity | 1.2 |
1.2 |
W / mK |
±0.12 |
ASTM D5470 |
| Thickness | 0.15 |
0.25 |
mm |
- |
ASTM D374 |
| Color | White |
White |
- |
- |
Visual |
| Reinforcement Carrier | Fiberglass |
- |
- |
- |
|
| Continuous Working Temperature | -45~170 |
-45~170 |
°C |
- |
- |
| Short time Use Temperature (30sec) | 288 |
288 |
°C |
- |
- |
| Density | 1.6 |
1.6 |
g / cm3 |
- |
ASTM D792 |
| Initial Tack | 10 |
10 |
cm |
- |
PSTC-6 |
| Lap Shear Strength | 74 |
76 |
N / cm2 |
- |
D1002 |
| Die Shear Strength @25°C | 113 |
126 |
N / cm2 |
- |
- |
| Die Shear Strength @80°C | 80 |
85 |
N / cm2 |
- |
- |
| Die Shear Strength @150°C度 | 30 |
35 |
N / cm2 |
- |
- |
| Holding Power 1000g@25°C using 1 in2保持力 | >40000 |
>40000 |
min |
- |
PSTC-7 |
| Holding Power 1000g@80°C using 1 in2 | >40000 |
>40000 |
min |
- |
PSTC-7 |
| Holding Power 1000g@150°C using 1in2 | >10000 |
>10000 |
min |
- |
PSTC-7 |
| Tensile Strength | 450 |
650 |
psi |
- |
ASTM D412 |
| Dielectric Breakdown Voltage(Vac) | 2 |
3 |
KV |
±10% |
ASTM D149 |
| Dielectric Breakdown Voltage (Vdc) | 3 |
4 |
KV |
±10% |
ASTM D149 |
| Volume Resistance | >1011 |
>1011 |
Ohm-cm |
- |
ASTM D257 |
| Thermal Impedance@ 10psi | 0.70 |
1.17 |
°C-in2 / W |
- |
ASTM D5470 |
| Thermal Impedance@ 30psi | 0.68 |
1.13 |
°C-in2 / W |
- |
ASTM D5470 |
| Thermal Impedance@ 50psi | 0.63 |
1.07 |
°C-in2 / W |
- |
ASTM D5470 |
| Flame Rating | V-0 |
V-0 |
- |
- |
UL 94 |
|
|||||
REACH Compliant Need samples? |
Pre-cut for different shapes |
|
|||
 |
|
||||
| Get Free Samples / | Contact Us / | Site Map / |
|
Copyright © 2017 T-Global Technology |